The Nature Climbing – STOAK board is the worlds first hangboard which combines STONE and OAK. Based on a rounded and sloped stone rail design combined with wide wooden pockets it includes everything you need to train efficiently at home.
Designed, shaped and produced in our own workshop in Aarhus, Denmark and made from the highest quality of FSC certified solid oak and European stone.
The Nature Climbing – STOAK board redefines the possibilities seen in a hangboard. Keep your fingers and skin conditioned and your contact strength in top while simply training at home or getting ready for your next outdoor project.
The Nature Climbing – STOAK board is based on a wide edge layout with the option of using pure walnut inlays to adjust pocket depth. This ensures a desired grip depth and sufficient grip spacing for each edge size while making it possible to train using the fingers you want.
Includes the option of adding two STOAK jugs in solid oak to mount on each side of the board.
All the edges of both wood and stone are rounded to perfection to ensure maximum comfort. The next natural evolution in hangboards – combining unmatched comfort, design and possibilities. Granite will have most friction and toughen your skin the most, white and rose sandstone will require more tension and will still work your skin. All will be suitable to hang and train on in adequate conditions by most climbers using a bit of e.g. our natural RAW chalk. When making the choice of which stone type you want, have in mind what stone you would normally climb on and what you want to work on.
Comes with the option of choosing:
GRANITE – MOST FRICTION (ALL-ROUND CLIMBER)
WHITE SANDSTONE – MID-RANGE FRICTION (FONTAINEBLEAU SPECIALIST)
ROSE SANDSTONE – LEAST FRICTION (DEDICATED CLIMBER)
… and it is pretty enough to have in your living room.
Holds & profile:
25 mm x2.
15 mm x2.
25 mm 30 degrees sloped stone rail (granite, rose sandstone or white sandstone).
4 x 5mm solid walnut wood inlays which enables 20mm x2, 10mm x2 or 5mm x2.
4 x stainless steel screws with torx drive for mounting in wood (make sure to use properly dimensioned and strong wall plugs and screws for mounting. Mount the board on a completely flat surface).
Optional: Include two STOAK jugs in solid oak – comes with 4 x stainless steel screws with torx drive for mounting in wood (make sure to use properly dimensioned and strong wall plugs and screws for mounting. Mount the holds on a completely flat surface).
Nature Climbing – STOAK board dimensions: solid oak – 50 cm x 2,5 cm x 15 cm.